How To Cut Your Own Raw Hem Jeans

Lay them on a flat surface and smooth them out so the hems on both legs are lined up straight. Braiding starts before your nimble fingers ever grab hold of your strands.

Diy Raw Hem Jeans You Can Do It - See Anna Jane

You can either wash your jeans or rub the hem against a rough surface.

How to cut your own raw hem jeans. With a pencil, draw a line on the bottom pair, tracing the. If you follow me on instagram (@julietatorresd) you may have caught the stories where i showed the process. Use fabric (or super sharp) scissors to cut the hem off your jeans.

Take off jeans and press the hemline ( without the seam allowance) on both the legs. Then take off the jeans and button them and fold them in half so they're as straight and even as you can. Next, on the top layer where you snipped, start cutting.

Take off your jeans and lay them flat on floor, then cut with a zig zag about 1/2 below the pin mark (because the fray will get longer over time, ending up just right at that pin length). Cut off piece and initial fraying. You will need to add seam allowance of 1 inch to this measure, for folding under.

Measure your jeans starting at the crotch, measure about 25 to 26 inches down the inseam, then use a ruler and a piece of chalk to draw a horizontal line denoting where the hem will be cut. Mark the seam allowance 1 inch from the hem line and cut all around for both the legs. How to cut your jeans.

Put on your jeans and mark with a safety pin where you want the length to hit (pin other leg to match) 2. Alright, time to grab your scissors and cut along your chalk line. Make sure that the length is even on both the legs.

The boots i'm wearing in the video: Once you know the length you want, you will want to button your jeans and fold them neatly in half. Hang out with me here!:instagram:

If your jeans are too long, or you just want a little distressed hem, here's an easy video showing you how to do it! Try to go in as straight a line as possible. Cut slowly and follow your chalk mark so that you have a nice straight edge.

If you're wanting to be super precise, use a ruler or anything with a straight edge as your guide. You only need to do this on one leg, because you will fold the jeans and line up the hems before you start cutting. "prep is such an important part of your braid," potempa says.

Put the new jeans that you want to cut underneath the old ones, matching up the waist, crotch, and side seams. Now with the shape and initial fraying done, there's only one last step. For that iconic frayed look, tug at the hem of your jeans until frayed to your liking.

Diy Raw Hem Frayed Jeans - Youtube